Storm overflow register · Dwr Cymru Welsh Water

Heswall sewage works: storm overflow spills 2025

Heswall sewage treatment works, run by Dwr Cymru Welsh Water, has 1 monitored storm overflow discharging to Estuarial Waters of the River Dee. In 2025 it recorded 22 spills totalling 206 hours, against 58 spills and 716 hours in 2024. By hours spilling, it ranks 16 of 26 Dwr Cymru Welsh Water works, where 1 spilled longest.

Every spill in 2025

Each blue mark is one spill, placed by when it started and sized by how long it lasted. Hover over a mark for the date and duration.

Hours spilling by month, 2025

Hours, measured by the event duration monitor.

Longest single spills

Started (GMT)	Overflow	Duration
5 Jan 2025, 11:45	Heswall Wastewater Treatment Works	3.5 days
1 Jan 2025, 02:15	Heswall Wastewater Treatment Works	1.2 days
14 Nov 2025, 16:00	Heswall Wastewater Treatment Works	22.0 h
18 Nov 2025, 23:30	Heswall Wastewater Treatment Works	16.0 h
14 Jun 2025, 01:30	Heswall Wastewater Treatment Works	10.3 h

Estimated 2025 spill volume and pollution

Estimate, not a measurement. Monitors record how long an overflow spills, not how much. This calculator back-calculates a spill rate from the size of the works, using the Environment Agency's permit formulae, and multiplies it by published storm-sewage concentrations. How it works.

This works serves fewer than 2,000 people, or was not matched to a UWWTD report, so its size is not published. The population equivalent above is a placeholder of 1,000. Enter the population served if you know it.

Volume, central estimate3,521 m³range 1,403 – 8,840 m³

In litres3.5 millionrange 1.4 million – 8.8 million L

Olympic swimming pools1.4at 2,500 m³ each

Organic load, as people's raw sewage5,282person-days of untreated BOD

Assumed spill rate while spilling: 1.9 – 11.9 L/s (central 4.8 L/s), from a dry-weather flow of 1.9 L/s.

Pollutant released	Low	Central	High	Concentration used (low / typical / high)
BOD₅ (organic load)	56 kg	317 kg	1,768 kg	40 / 90 / 200 mg/L Low/high: Europe range, Ellis & Jenkins 2005; typical: UK, Ellis & Jenkins 2005 (both via botturi)
Suspended solids	147 kg	1,496 kg	6,374 kg	105 / 425 / 721 mg/L Low/high: Europe range; typical: UK, Ellis & Jenkins 2005 (via botturi)
Ammonium-N	2.7 kg	22 kg	82 kg	1.9 / 6.3 / 9.3 mg/L Low: Germany, Brombach 2005; typical/high: Paris range 3.3–9.3 midpoint and top, Gasperi 2012 (via botturi); no UK value found
Total phosphorus	1.7 kg	9.2 kg	48 kg	1.2 / 2.6 / 5.4 mg/L Low/high: Paris, Gasperi 2012; typical: Slovakia (via botturi). UK figure of 10 mg/L treated as an outlier
E. coli	140.3 billion organisms	3.5 trillion organisms	88.4 trillion organisms	10,000 / 100,000 / 1.0 million per 100 mL Median range at CSO and retention-tank outlets, Stott et al. 2018 (via botturi); typical = log midpoint

Low combines the low spill rate with low concentrations, and high combines high with high, so the true figure is very likely inside the range. Long spills become more diluted as they go on, so the central figure tends to overstate the load of long events. The calculator does not estimate the effect on the receiving water, which depends on river flow or tide at the time of the spill.

Heswall Wastewater Treatment Works

Storm tank at sewage works · discharges to Estuarial Waters of the River Dee

Spills 2025: 22 (206 hours) · down 62% on 2024
Spills 2024: 58 (716 hours)
Long-term average: 22.1 spills a year (monitored since 2015)
Monitor uptime: 99% of the year
Investigation: No investigation activity in reporting period
Improvement: No improvement action in reporting period
Shellfish water: Dee (East)
WFD catchment: Mersey Mouth (GB641211630001)
Outlet location: SJ2497081795 (OS grid reference) · View on Apple Maps
EA ID / permit: DCW00061 · CG0362601 · company name: Heswall Wwtw

How the estimate works

Dry-weather flow (DWF) = population × water use per person × (1 + infiltration). Water use is 136.5 L per person per day, England's per-capita consumption for 2024–25 [EA]. Infiltration of groundwater into sewers is taken as 0–40% of that flow [Escritt, via HBF]. The Environment Agency defines DWF as PG + I + E [EA].
Population. The size of each works comes from the load entering it as reported under the Urban Waste Water Treatment Directive, in population equivalents (1 p.e. = 60 g of BOD a day) [UWWTD]. We treat population equivalent as population. That overstates flow where trade effluent adds load, and no official source links the two. Works serving fewer than 2,000 p.e. are not reported, so their size has to be entered by hand.
Low spill rate = DWF. This is the method used by Giakoumis & Voulvoulis (2026), which they note likely underestimates storm loads [G&V].
High spill rate = Formula A − flow to full treatment = (DWF + 1360P) − 3DWF. This is the largest flow the permit expects the storm tanks to handle before it passes on to treatment or overflows [EA]. The central rate is the geometric mean of the low and high rates.
Volume = spill rate × hours spilling, with hours taken from the event duration monitor.
Pollution = volume × published storm-sewage concentrations [Botturi et al.] [US EPA]. Organic load is also shown as person-days of untreated sewage at 60 g of BOD per person per day [UWWTD].

What this cannot tell you. It gives no real flow for any single spill, and no effect on the river or sea, which depends on the flow, tide and the other pressures on the water at the time. It gives no figure for spills from overflows on the sewer network, which serve catchments of unknown size. It is a way to put hours into rough physical terms, not a substitute for flow monitoring.

Sources

← All Dwr Cymru Welsh Water works · Contains Environment Agency data licensed under the Open Government Licence v3.0. Spill start and stop times: © Environment Agency copyright and/or database right 2026. All rights reserved. They are water-company data and have not been verified by the Environment Agency. Works size: EEA Waterbase UWWTD. How to read the data.