Storm overflow register · Yorkshire Water

Sherburn In Elmet sewage works: storm overflow spills 2025

Sherburn In Elmet sewage treatment works, run by Yorkshire Water, has 1 monitored storm overflow discharging to Upper Fox Drain. In 2025 it recorded 22 spills totalling 113 hours, against 33 spills and 163 hours in 2024. By hours spilling, it ranks 206 of 283 Yorkshire Water works, where 1 spilled longest.

Works size: 12,015 population equivalent (SHERBURN IN ELMET STW, UWWTD 2018). Used for the spill volume estimate.

Every spill in 2025

Each blue mark is one spill, placed by when it started and sized by how long it lasted. Hover over a mark for the date and duration.

Estimated spill volume by month, 2025

Hours spilling each month × the estimated spill rate for a works of this size. The bars are central estimates and the whiskers show the low–high range. Method.

Cubic metres (m³), estimate. Hours are measured by the event duration monitor.

Longest single spills

Started (GMT)	Overflow	Duration	Estimated volume
5 Jan 2025, 18:15	Sherburn in Elmet STW	23.3 h	1,907 – 12,017 m³
14 Nov 2025, 19:15	Sherburn in Elmet STW	9.3 h	759 – 4,781 m³
6 Jan 2025, 17:30	Sherburn in Elmet STW	8.8 h	718 – 4,522 m³
20 Sep 2025, 18:30	Sherburn in Elmet STW	6.5 h	533 – 3,359 m³
1 Jan 2025, 04:45	Sherburn in Elmet STW	3.8 h	308 – 1,938 m³

Estimated 2025 spill volume and pollution

Estimate, not a measurement. Monitors record how long an overflow spills, not how much. This calculator back-calculates a spill rate from the size of the works, using the Environment Agency's permit formulae, and multiplies it by published storm-sewage concentrations. How it works.

Volume, central estimate23,263 m³range 9,266 – 58,404 m³

In litres23.3 millionrange 9.3 million – 58.4 million L

Olympic swimming pools9.3at 2,500 m³ each

Organic load, as people's raw sewage34,895person-days of untreated BOD

Assumed spill rate while spilling: 22.8 – 143.6 L/s (central 57.2 L/s), from a dry-weather flow of 22.8 L/s.

Pollutant released	Low	Central	High	Concentration used (low / typical / high)
BOD₅ (organic load)	371 kg	2,094 kg	11,681 kg	40 / 90 / 200 mg/L Low/high: Europe range, Ellis & Jenkins 2005; typical: UK, Ellis & Jenkins 2005 (both via botturi)
Suspended solids	973 kg	9,887 kg	42,109 kg	105 / 425 / 721 mg/L Low/high: Europe range; typical: UK, Ellis & Jenkins 2005 (via botturi)
Ammonium-N	18 kg	147 kg	543 kg	1.9 / 6.3 / 9.3 mg/L Low: Germany, Brombach 2005; typical/high: Paris range 3.3–9.3 midpoint and top, Gasperi 2012 (via botturi); no UK value found
Total phosphorus	11 kg	60 kg	315 kg	1.2 / 2.6 / 5.4 mg/L Low/high: Paris, Gasperi 2012; typical: Slovakia (via botturi). UK figure of 10 mg/L treated as an outlier
E. coli	926.6 billion organisms	23.3 trillion organisms	584.0 trillion organisms	10,000 / 100,000 / 1.0 million per 100 mL Median range at CSO and retention-tank outlets, Stott et al. 2018 (via botturi); typical = log midpoint

Low combines the low spill rate with low concentrations, and high combines high with high, so the true figure is very likely inside the range. Long spills become more diluted as they go on, so the central figure tends to overstate the load of long events. The calculator does not estimate the effect on the receiving water, which depends on river flow or tide at the time of the spill.

Sherburn in Elmet STW

Storm tank at sewage works · discharges to Upper Fox Drain

Spills 2025: 22 (113 hours) · down 33% on 2024
Spills 2024: 33 (163 hours)
Long-term average: 23.5 spills a year (monitored since 2020)
Monitor uptime: 93% of the year
Investigation: UWWTR investigation ongoing
Improvement: No improvement action in reporting period
WFD catchment: Carr Dike from Green Dike to Selby Dam (GB104027063610)
Outlet location: SE5292033420 (OS grid reference) · View on Apple Maps
EA ID / permit: YWS00388 · 27/24/0162 · company name: SHERBURN IN ELMET/STW

How the estimate works

Dry-weather flow (DWF) = population × water use per person × (1 + infiltration). Water use is 136.5 L per person per day, England's per-capita consumption for 2024–25 [EA]. Infiltration of groundwater into sewers is taken as 0–40% of that flow [Escritt, via HBF]. The Environment Agency defines DWF as PG + I + E [EA].
Population. The size of each works comes from the load entering it as reported under the Urban Waste Water Treatment Directive, in population equivalents (1 p.e. = 60 g of BOD a day) [UWWTD]. We treat population equivalent as population. That overstates flow where trade effluent adds load, and no official source links the two. Works serving fewer than 2,000 p.e. are not reported, so their size has to be entered by hand.
Low spill rate = DWF. This is the method used by Giakoumis & Voulvoulis (2026), which they note likely underestimates storm loads [G&V].
High spill rate = Formula A − flow to full treatment = (DWF + 1360P) − 3DWF. This is the largest flow the permit expects the storm tanks to handle before it passes on to treatment or overflows [EA]. The central rate is the geometric mean of the low and high rates.
Volume = spill rate × hours spilling, with hours taken from the event duration monitor.
Pollution = volume × published storm-sewage concentrations [Botturi et al.] [US EPA]. Organic load is also shown as person-days of untreated sewage at 60 g of BOD per person per day [UWWTD].

What this cannot tell you. It gives no real flow for any single spill, and no effect on the river or sea, which depends on the flow, tide and the other pressures on the water at the time. It gives no figure for spills from overflows on the sewer network, which serve catchments of unknown size. It is a way to put hours into rough physical terms, not a substitute for flow monitoring.

Sources

← All Yorkshire Water works · Contains Environment Agency data licensed under the Open Government Licence v3.0. Spill start and stop times: © Environment Agency copyright and/or database right 2026. All rights reserved. They are water-company data and have not been verified by the Environment Agency. Works size: EEA Waterbase UWWTD. How to read the data.